Services Motors for Gates Ltd. deals exclusively with the wholesale and retail sale of products, but thanks to its extensive network of partners, our colleagues can offer you a wide range of qualified fitters and installers. The guarantee is only valid for qualified installation and service! Home Services The advantages of ALUTECH Group service centres Installation Professional installation ensures a guarantee and long-term reliable operation. Service In the event of a breakdown, you can easily find the right technician for you among our partners. For repairs under warranty and out of warranty, feel free to contact our partners. Extensive partner network Thanks to our ever-expanding network of partners, more and more companies offer scheduled service. We recommend servicing your gates at least once a year to ensure trouble-free operation. Partner linkSectional doorRolling systemsEntrance gateAutomation for gatesSectional door After installation and acceptance of the product, we recommend that you contract an ALUTECH representative to service the door. Remember: after-sales service is much cheaper than repairs. We recommend servicing garage and industrial doors: at least 1 time a year at least 1 time in 3 months if the gate is operated under special conditions. For example, in rooms with high humidity or in regions with harsh climates (high wind loads, negative temperatures several times a year, etc.). Intensive use (more than five times a day) is also an indication of special operating conditions. In addition, we recommend that you carry out after-sales service: on completion of construction, in the room where the gate is installed three months after the product is installed. For each scheduled service (technical) service, the product passport must be marked. Rolling systems Timely maintenance of the cylinder system is a prerequisite for its high consumer properties. After installation and acceptance of the product, we recommend that you conclude a service contract with an authorised representative of the ALUTECH Group. Maintenance and repair of roller shutters should only be carried out by service technicians, using only original spare parts and accessories. Servicing should be carried out at least once a year . If the product is used under special conditions (prolonged exposure to high or low temperatures, increased dust content, etc.), then at least six times . And also after the work is completed if the shutters were installed during construction or repair of the installation. Service technicians check the following components and mechanisms: blinds Box guide rails on the axis canvas suspension to drive cylinders brackets, covers, etc. A full list of maintenance routines can be found in the relevant documents: Manual shutter systems manual A guide to the operation of automatically controlled roller shutter systems. Based on the results of the routine maintenance, the customer will be provided with a list of parts and fittings to be replaced.For each scheduled service (technical) service, the product passport must be marked. Remember: after-sales service is much cheaper than repairs. Entrance gate The technical inspection and maintenance of products is carried out in accordance with the established list of regular maintenance. The service is provided by the masters of the organisation that installed the gate. ALUTECH Group's authorized representatives are experts in product design, assembly and installation. They are trained in working techniques and have received training in safety measures. The first repair should be carried out three months after the product is installed. Also - at least once a year. In special operating conditions - at least 1 time in three months. Special operating conditions include: access to the site and parking, with more than 30 cycles of intensive gate use per day; regions with high wind loads are exposed to long periods of freezing temperatures - more than 6 months. Automation for gates Once the product has been installed and accepted, we recommend that you conclude an agreement for the automation service with an ALUTECH authorised representative. Remember: after-sales service is much cheaper than repairs. Recommended maintenance is recommended at least every six months. For each scheduled service (technical) service, the product passport must be marked. They trust us
